Skip to content
SmileMath

Plan the last roll in Bloxorz

The exit is one square wide. Your block has to stand upright on it, so reaching the square beside the hole is only half the problem. Work backward from the finish to find the position you need.

Count three squares from a standing start

Imagine four safe squares in a straight line, numbered 1 through 4. Start upright on 1. Press Right once and the block lies across 2 and 3. Press Right again and it stands on 4. Two presses move an upright block three squares and leave it upright again.

Now imagine square 4 is the hole. The position to aim for is a block lying across 2 and 3. Either end of the block can lead the way there. Check both squares for gaps before committing to the move.

Use a sideways roll to line up the finish

A block lying east to west behaves differently when you move north or south. Both ends roll one row together and keep the same orientation. Suppose you are lying across 2 and 3 in the row above the exit lane. If both squares below you are solid, one Down moves you into the lane. Right then tips the block into the hole.

That sideways move is especially helpful on narrow bridges. Before crossing, picture the two squares where the block will land. A bridge that supports one end still leaves the other end hanging.

Leave room to stand up

On an orange tile, lying flat spreads the block's weight. Standing upright breaks the tile. Treat a strip of orange squares as a crossing and look for a solid square beyond it where the block can stand. At an X-shaped switch you need the opposite approach. Find the pair of squares beside it that lets you tip upright onto the switch.

If you keep arriving at the hole sideways, replay the last few moves from a wider part of the stage. Often a single sideways roll there gives you the close approach you were missing.